Tektronix TEK AM503 Current Probe Amplifier

Current Probe Amplifier for Tek TM 500 series, can be used in conjunction with current clamp probes A6302 / P6302 or A6303 / P6303.

Displays Current Signals on an Oscilloscope
Current Range, Maximum Current, and Bandwidth Determined by the Probe.
Allows display of current on any oscilloscope with 10 mV/div sensitivity, 50 ohms or 1 M ohm input.
Bandwidth can be set to Full (where it is limited by the probe in use) or to 5 MHz.
Coupling can be switch selected to ac or dc.

Specifications:
• Maximum Input Current - 20 A (dc + peak ac) for A6302; 100 A (dc + peak ac) for A6303.
• Maximum Voltage for Current Under Test (Bare Conductor) - 500 V (dc + peak ac) for A6302;
700 V (dc + peak ac) for A6303.
• Bandwidth (-3dB) - Dc to at least 50 MHz with A6302; Dc to at least 15 MHz with A6303.
• Rise Time (Full Bandwidth) - 7 ns or less with A6302; 23 ns or less with A6303.
• Deflection Factor - 1 mA/div to 5 A/div for A6302; 20 mA/div to 50 A/div for A6303. In a 1-2-5 sequence for both probes.

Offered here is the AM503 plugin alone, without any accessories.